xf-6 phaser

Overview
xf-6 is a phaser: moving notches in the sound that make a swirl.
Header bar
| Control | What it does |
|---|---|
| patch, random, back | The shared module buttons. See The rack. |
| stages, fb, range, rate | The four parameters as values. Drag them, or drag in the display. |
| Bypass (power icon) | Hear the sound without the effect. |
Display
The top line shows the stages, the notches, the frequency span, the rate and the feedback. The blue ladder at the left shows the stages: drag it up or down. The curve shows where the notches are now: drag it up or down for fb. Drag the white bracket under the curve for range. The panel on the right picks what moves the notches: lfo (a steady sweep), env (the level of the sound) or s&h (random jumps).
Parameters
| Parameter | Range / values | What it does |
|---|---|---|
| stages | 2 to 24, in even steps. Default 8. | How many notches. Two stages make one notch. |
| fb | -95 to +95. Default +53. | Feedback. It sharpens the notches into a whistle. Minus values flip the peaks. |
| range | 0.5 to 9 octaves. Default 5.6. | How far the notches travel. |
| rate | 0.02 to 10 Hz. Default 0.21 Hz. | How fast the sweep moves. With env, how fast it follows the sound. With s&h, how often it jumps. |