launcherv2by tantrum

    xw-2 wide

    Type: audio effect, space

    xw-2 wide
    xw-2 with default settings while the song plays.

    Overview

    xw-2 makes a sound wider or narrower. It changes the width of a stereo sound, can make a mono sound wide, and keeps the bass in the center.

    Header bar

    ControlWhat it does
    patch, random, backThe shared module buttons. See The rack.
    width, space, time, monoThe four parameters as values. Drag them, or drag in the display.
    haasDelays one side. This is very wide, but check the mono sum on the right of the display.
    sumListen in mono, to check what a phone or a club speaker hears.
    Bypass (power icon)Hear the sound without the effect.

    Display

    The left view is a vectorscope: a tall shape is mono, a wide shape is wide. Drag it left or right for width. The middle view shows the sound by frequency, from left to right. Drag it left or right for space, and up or down for time. The orange line marks the mono frequency: drag it. The top line shows the values and the correlation between the sides. The meter on the right shows the mono sum.

    Parameters

    ParameterRange / valuesWhat it does
    width0% to 200%. Default 100%.The width of what is already stereo. 0% is mono. 100% leaves it as it is.
    space0% to 100%. Default 35%.Adds a side signal made from the center. It widens mono sounds and still sums back to clean mono.
    time0.3 to 19 ms. Default 1.7 ms.The delay of that side signal. It sets which frequencies lean left and which lean right.
    monooff, or 30 to 550 Hz. Default 129 Hz.Everything below this frequency is summed to mono, so the bass stays in the center.