master

Overview
master sets the level and pan of its channel, and holds the sends, the pitch bend range, the macros and the matrix. You cannot remove it. It stays in view at the bottom of the rack, under the fx bar. Its volume is the same as the fader of the channel in the mixer.
Header bar
| Control | What it does |
|---|---|
| Channel name | The name of the channel, after master. |
| macros | Shows the 8 macro knobs of the channel. See Automation and modulation. |
| matrix | Shows every modulation source of the channel against its targets. See Automation and modulation. |
| send a / send b | How much of this channel goes to return a and return b. They show when the project has return channels. Drag to change. |
| bend | How far the pitch wheel bends the notes of this channel, in semitones up and down, from 0 to 48. Default: 2. Drag to change. |
| midi out | Also sends the notes of this channel to a MIDI port, next to its own instrument. Click to pick the port and channel. It then shows the channel, for example midi out ch 1. |
| peak | The peak level of the channel in dB. |
| clip | Lights after the level goes over 0 dB. Click it, or click the view, to clear it. |
Display
The out view shows the wave of the channel output as it scrolls, with lines at 0 dB and -6 dB. Parts over 0 dB show in the warning color, and the word over shows at the top right.
Parameters
| Parameter | Range / values | What it does |
|---|---|---|
| volume | -inf to +6 dB. Default 0 dB. | The channel level. The tile shows the left and right levels against a mark at 0 dB. |
| pan | left … c … right. Default center. | The position of the channel between left and right. |