xt-4 delay

Overview
xt-4 is a clean stereo delay. The left and right sides each have their own time. The repeats follow the song tempo, or use free times in milliseconds.
Header bar
| Control | What it does |
|---|---|
| patch, random, back | The shared module buttons. See The rack. |
| sync | On: both sides follow the tempo as note lengths. Off: free times in milliseconds, each side on its own. Default on. |
| link | The right side uses the left time. |
| ping pong | The repeats bounce left, right, left. |
| Bypass (power icon) | Hear the sound without the effect. |
Display
The left and right views each show the repeats of one side as rings. Drag left or right in a view to change its time. Drag up or down to change the feedback. Double-click to reset. Each view shows its note length and time in milliseconds at the bottom left, and the feedback at the bottom right.
Parameters
| Parameter | Range / values | What it does |
|---|---|---|
| left time / right time | With sync: 1/32, 1/16, 1/8 t, 1/16 d, 1/8, 1/4 t, 1/8 d, 1/4, 1/4 d, 1/2, 1 bar. Defaults 1/8 d (left) and 1/4 (right). Without sync: milliseconds. | The time between repeats on each side. t is a triplet, d is dotted. |
| feedback | 0% to 92%. Default 41%. | How much of each repeat goes back in. Set it in the display. |
| tone | dark … flat … thin. Default slightly dark. | Left of center a low-pass filter darkens the repeats, down to 600 Hz. Right of center a high-pass filter thins them, up to 2 kHz. |
| mix | 0% to 100%. Default 35%. | The balance of dry sound and repeats. |